By Alexander Pluke, CEO Additive Flow
That is the question.
The pertinent question for users of additive manufacturing, at least.
So you’ve printed a part and it’s failed. FAILED!
How could this be?
You’ve meticulously gone through all the steps you should. Drawn up your CAD model, loaded up the design domain, ran it through your favorite topology optimisation tool, fixed it (with Magics / Netfabb or a-another) – and printed it with the perfect settings recommended by the print manufacturer.
So what happened?
Well, you may have missed the crucial fact that most topology optimisation software packages out there are missing an important (essential) feature. Most of them do not actually take into account how additive processes behave – which means that optimisations are taking place based on an assumption. And this assumption is invariably incorrect.
What assumption is this?
It’s the (intuitively sensible) assumption that your 3D printed part will behave the same from all directions. This is called isotropy – but, unfortunately, it is not the case.
So why even bother topologically optimising with incorrect assumptions, and with tools that you know won’t do the job? Unless you like to invite a whole bunch of testing, and insert a critical dose of ‘tacit knowledge’ into your organisation — it sounds like a lot of hassle, and a lot of risk.
We took a different, wider approach to topology optimisation.
Additive Flow is Additive Aware. We understand how additive works, and have built from the ground up a suite of tools that optimise subject to the nuances of additive manufacturing processes. Our Formflow software can help de-risk your development cycle – and harness the full potential of AM.
What is Orthotropy, and Why it matters
Orthotropy is a feature of 3D printed parts that behave differently based on the direction they are measured. Most topology optimisation tools assume 3D printed parts behave the same in all directions (isotropy) – which means these results are neither accurate nor optimised.
Additive Flow’s topology optimisation capability is natively built to be ‘Additive Aware’ – and optimises shape and material subject to the varying material properties, including orthotropy. If this is not taken into account, parts can fail and opportunities will be missed.
Additive manufacturing is the meeting point of material science, design engineering, production management, and much more. It is so multi-disciplinary that the human mind — no matter how intelligent or skilled up — can boggle.
This is where a new breed of tools are needed, to help our boggling minds to make the most of this exciting, if complex, technology.
As a quick material properties refresher:
Or, to demonstrate it visually:
Additive manufacturing tends to produce parts that are anisotropic along the build axis. This means that 3D printed parts are orthotropic, often weaker, to forces applied perpendicular to the build direction.
If these orthotropic properties are ignored, and engineers use the prevailing isotropic solvers on the market, results will be wrong, because they cannot take into account the actual material properties.
This means isotropic topology optimisation is severely limited — because it is based on the false assumption that materials behave in the same way. The engineer has to choose from two bad options:
For the majority of additive manufacturing processes that are orthotropic, how can engineers be confident about their results — and hence deploying AM in their businesses?
Orthotropy plays an even greater role with composites, where fibre alignment delivers enhanced engineering properties in specific directions. Additive manufacturing with both chopped and continuous fibres can result in seriously powerful mechanical properties. For example with an FFF process, Carbon filled ABS performed 2x to 4x better along the strongest plane in key mechanical tests vs. pure ABS.
How would the engineer properly design for these compelling material properties along certain axes? Especially when accounting for the fact that the weakness along the build direction for CFF is 50% weaker.
The orthotropic solvers within Additive Flow’s software stack are able to optimise topologies for single and multi materials — accommodating both the weakness of build directions and the superpower of composites.
For example, the power of our solvers in application was demonstrated in our work with Royal HaskoningDHV— where they saved a further 20% in weight versus alternative isotropic solvers.
You’re welcome to get in touch, we’d love to speak about how we can help you harness the orthotropy out of your 3D Printing — and take the guesswork out of AM.